In this article, I will show you how to reset your Skullcandy Indy Evo earbuds.

Initial Steps for Reset

Forgetting the Device

• Forget Both Earbuds: The first thing you need to do is forget both of them, forget both of the headphones, forget the device.
• Turn Off Bluetooth: Then you need to turn off your Bluetooth.

Resetting Each Earbud

Resetting the First Earbud

• Hold the First Earbud: The next thing you need to do is to take one of them and hold it until it turns off like that. And then the next one holds. This should be about 6 seconds when the light flashes.
• Entering Pairing Mode: That’s the pairing mode. So you just hold it, go through the pairing, and then have it turn off.
• Hold Down the Skull: Then you’re going to want to take the first one again and hold down the skull. And it’s going to go from off to off. So it turns on, goes through the pairing mode, and then the solid red color again and turns off.
• Place Back in Case: And you’re going to place that one back in the case.

Resetting the Second Earbud

• Hold the Second Earbud: Then you’re going to want to do it to the other side. So you put your finger on the skull, have it turn on, go through pairing, and then turn off.
• Place in the Case: And you’re going to place it back in the case.

Finalizing the Reset

Checking the Reset

• Pull Out of Case: After they’ve been off, they should be reset. Now pull them out of the case; they both turn on. That means that they should be paired with each other. Those blue flashing lights.
• Confirming Pairing: And then once they both go blue, that means they’ve paired with each other.

Connecting to Your Device

• Lead Headphone: And now this one’s like the lead headphone. And this one will now connect to your phone.
• Turn Bluetooth On: So if you go back to your phone, turn the Bluetooth on, and you’ll see now that there’s only one Indy Evo and you can go ahead and connect to that.
• Successful Connection: And now it is connected and they are ready to go.

Conclusion

Resetting and clearing your earbuds can help you if you have connection problems. With this technique, you reset your earbuds, connect them again to your device, and everything should work fine after that. I hope it was helpful for you.