How To Reset Skullcandy Indy Evo Earbuds

Hello, guys. In this video, I will show you how to reset your Skullcandy Indy Evo earbuds. But first of all, I just want to mention, don’t forget to subscribe to my channel for a chance to win a new iPhone 13. Let’s jump into it.

Preparing for Reset

First, let’s take out the earbuds from the case.

Resetting Your Earbuds

To reset your earbuds, it’s quite easy. You just have to hold both of the earbuds in your hand and tap on them at the same time and hold for 10 seconds.

Step-by-Step Reset Instructions:

  1. Hold Earbuds: Hold both of the earbuds in your hand.
  2. Tap and Hold: Tap on them at the same time and hold for 10 seconds.
  3. Count to 10: As you’re holding them, count to 10 (1, 2, 3, 4, 5, 6…).
  4. Observe the Lights: When you reach 10, it’s going to light up both lights, as you can see, in red and blue. It’s blinking.
  5. Reset Complete: Now it’s resetting and clearing all the information.

Post-Reset

Now you can connect a new device or you can reconnect your device if you had problems. Resetting and clearing your earbuds can help you if you have connection problems. Sometimes the two earbuds lose each other, and they are working separately, or you can hear only in one earbud, which can be very frustrating. But with this technique, you reset your earbuds, connect them again to your device, and everything should work fine after that.

Alternative Troubleshooting:

  • Turn Off and On: If you don’t want to do this right away when you have a problem, you can just turn off your earbuds and turn them on again. Maybe that helps.
  • Repeat Reset if Necessary: But if it doesn’t, you can anytime reset your earbuds, and they will pretty much work perfectly after you do that.

Conclusion

That’s it for this video. I hope it was helpful for you. If it was, please consider subscribing, and see you in the next one. Bye.

Leave a Comment